{"title":"Epoxy Floor","description":"\u003cdiv class=\"epoxy\"\u003e\n\u003cdiv class=\"col-sm-12 essentials-complements\"\u003e\n\u003cdiv class=\"col-sm-6\"\u003e\n\u003ch2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Essentiels.png?1226686490779651331\" alt=\"\"\u003e\u003cspan class=\"entete-titre-epoxy\"\u003eThe\u003c\/span\u003e Essentials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNitrile gloves\u003c\/li\u003e\n\u003cli\u003eSafety goggles\u003c\/li\u003e\n\u003cli\u003eDrill with mixer\u003c\/li\u003e\n\u003cli\u003eStir stick\u003c\/li\u003e\n\u003cli\u003e100% polyester brush\u003c\/li\u003e\n\u003cli\u003e10 mm lint-free roller\u003c\/li\u003e\n\u003cli\u003eSpiked shoes\u003c\/li\u003e\n\u003cli\u003eXylene\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-6\"\u003e\n\u003ch2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Complements.png?1226686490779651331\" alt=\"\"\u003e\u003cspan class=\"entete-titre-epoxy\"\u003eThe\u003c\/span\u003e Complements\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCotton cloths\u003c\/li\u003e\n\u003cli\u003eConcrete preparation\u003c\/li\u003e\n\u003cli\u003eDegreaser\u003c\/li\u003e\n\u003cli\u003eCleaning brush\u003c\/li\u003e\n\u003cli\u003eConcrete filler\u003c\/li\u003e\n\u003cli\u003eGinder\u003c\/li\u003e\n\u003cli\u003eSander\u003c\/li\u003e\n\u003cli\u003eVacuum cleaner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cp class=\"small-title-epoxy\"\u003eApproximate Coverage From One Container (4.5 L)\u003c\/p\u003e\n\u003ctable class=\"table table-striped\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard colours (first coat)\u003c\/td\u003e\n\u003ctd\u003eAbout 400 sq. ft. (5-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard colours (second coat)\u003c\/td\u003e\n\u003ctd\u003eMaximum 250 sq. ft. (8-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClear epoxy on smooth surface\u003c\/td\u003e\n\u003ctd\u003eAbout 250 sq. ft. 8-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClear epoxy on textured surface (flakes)\u003c\/td\u003e\n\u003ctd\u003eAbout 100 sq. ft. (20-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety colours\u003c\/td\u003e\n\u003ctd\u003eMaximum 125 sq. ft. (16-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetallic colours\u003c\/td\u003e\n\u003ctd\u003eMaximum 60 sq. ft. (32-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eImportant!\u003c\/span\u003e These quantites are aproximate and are for reference only. The required amount may vary depending on the texture of the surface and the thickness of the coats applied.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy1\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Preparation-surface.png?10820792025657361221\" alt=\"\"\u003e\u003cspan\u003e Surface Preparation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy1\"\u003e\n\u003cp\u003eProper surface preparation is crucial. The concrete must be clean, dry and free of oil and contaminants.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eCLEANING:\u003c\/span\u003e Clean the surface using a concrete preparation. Rinse thoroughly and leave to dry for at least 48 hours. For stubborn oil stains, use a degreaser.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eSANDING:\u003c\/span\u003e Resurfacing with a polisher is by far the best surface preparation method, but it can be replaced by sanding for most residential projects. Sand the surface using a sander fitted with 60-grit sandpaper in order to remove old paint.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eREMOVING DUST:\u003c\/span\u003e Remove all dust from the surface using a shop vacuum. Remove all contaminants or fine concrete dust from the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eFILLING CRACKS:\u003c\/span\u003e Expand the cracks using a grinder in order to free up friable particles, and clean with the shop vacuum. Use a concrete filler. TO\/GO 100% solids epoxy can be applied 4 to 6 hours later.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy2\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Coloration.png?7646703456858064830\" alt=\"\"\u003e \u003cspan\u003eTinting\u003cspan class=\"small-hidden\"\u003e (Before Adding The Hardener)\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy2\"\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eREADY-MIXED COLOURS:\u003c\/span\u003e You only need to stir it a little before adding the hardener.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003ePERSONALIZED COLOUR:\u003c\/span\u003e Pour all of the tint in the epoxy resin container (component A). Mix, scraping the sides and bottom of the bucket to get a homogeneous colour. If a coat requires more than one 4.5 L container, mix the containers together in a 5-gallon pail and pour back into the original containers according to volume.\u003c\/p\u003e\n\u003cp class=\"important\"\u003e\u003cspan class=\"small-title-epoxy\"\u003eIMPORTANT!\u003c\/span\u003e Colour variations may occur if tinting, mixing and application procedures are not followed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy3\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Malaxage.png?7646703456858064830\" alt=\"\"\u003e \u003cspan\u003eMixing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy3\"\u003e\n\u003cp\u003eStir each component separately. Pour all the hardener (component B) in the epoxy resin (component A). Mix well for 4 minutes at a low speed (300 to 450 RPM) using a drill fitted with a mixer. Do not mix at a high speed to prevent air entrapment bubbles. Scrape the sides and bottom of the bucket frequently with a stir stick to get a homogeneous mixture. Let the mixture stand for 2 minutes. Apply all of the mixture within 30 minutes.\u003c\/p\u003e\n\u003cp class=\"important\"\u003e\u003cspan class=\"small-title-epoxy\"\u003eIMPORTANT!\u003c\/span\u003e Mixing must be done properly in order for the hardener to have a uniform effect. The product must be applied within 30 minutes of mixing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy4\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Application.png?7646703456858064830\" alt=\"\"\u003e \u003cspan\u003eApplication\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy4\"\u003e\n\u003cp\u003ePour the product directly onto the floor in consecutive and parallel strips. Using a brush, quickly cut in the edges. Then, using a squeegee, spread the product and back roll (left to right, then toward you). It is important to get a uniform coating and avoid puddling.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eRECOMMANDATIONS\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not touch up the product after 10 minutes.\u003c\/li\u003e\n\u003cli\u003eWear spiked shoes to walk on the coated surface.\u003c\/li\u003e\n\u003cli\u003eApply a coat of clear epoxy on dark or metallic colours.\u003c\/li\u003e\n\u003cli\u003eApply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn vertical or sloped surfaces, apply THIN COATS of the product to prevent sagging.\u003c\/p\u003e\n\u003cp class=\"important\"\u003e\u003cspan class=\"small-title-epoxy\"\u003eIMPORTANT!\u003c\/span\u003e The product will start to cure quickly after 40 minutes and will be completely unusable after 50 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eANTI-SKID SAND AND DECORATIVE FLAKES:\u003c\/span\u003e To get an anti-skid surface, sprinkle quartz sand evenly within 60 minutes of applying epoxy. Back roll (left to right, then toward you).\u003c\/p\u003e\n\u003cp\u003eUse the same technique to add decorative flakes. Apply an additional coat of clear epoxy to prevent the flakes from chipping.\u003c\/p\u003e\n\u003cspan class=\"table-title-epoxy\"\u003eAMOUNT OF DECORATIVE FLAKES BASED ON DESIRED HIDING LEVEL\/100 SQ. FT.\u003c\/span\u003e\n\u003ctable class=\"table table-striped\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHiding level\u003c\/th\u003e\n\u003cth\u003eApproximate percentage\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eApproximate quantity\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery light\u003c\/td\u003e\n\u003ctd\u003e2%\u003c\/td\u003e\n\u003ctd\u003e0.3 lb.\u003c\/td\u003e\n\u003ctd\u003e0.125 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight\u003c\/td\u003e\n\u003ctd\u003e5%\u003c\/td\u003e\n\u003ctd\u003e0.7 lb.\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e12.5%\u003c\/td\u003e\n\u003ctd\u003e1.75 lb.\u003c\/td\u003e\n\u003ctd\u003e0.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntense\u003c\/td\u003e\n\u003ctd\u003e25%\u003c\/td\u003e\n\u003ctd\u003e3.5 lb.\u003c\/td\u003e\n\u003ctd\u003e1.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery intense\u003c\/td\u003e\n\u003ctd\u003e50%\u003c\/td\u003e\n\u003ctd\u003e7 lb.\u003c\/td\u003e\n\u003ctd\u003e3.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComplete\u003c\/td\u003e\n\u003ctd\u003e100%\u003c\/td\u003e\n\u003ctd\u003e15 lb.\u003c\/td\u003e\n\u003ctd\u003e7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy5\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Temps.png?7646703456858064830\" alt=\"\"\u003e \u003cspan\u003eCuring Time\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy5\"\u003e\n\u003cp\u003eAllow a minimum of 24 hours before permitting foot traffic and a minimum of 48 to 72 hours before permitting vehicles on it. The temperature and humidity will affect the curing time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy6\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Nettoyage.png?7646703456858064830\" alt=\"\"\u003e \u003cspan\u003eCleaning\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy6\"\u003e\n\u003cp\u003eClean all tools with xylene immediately after use. Always keep your goggles and gloves on to avoid any contact with the product.\u003c\/p\u003e\n\u003cp class=\"important\"\u003e\u003cspan class=\"small-title-epoxy\"\u003eIMPORTANT!\u003c\/span\u003e Once the product has cured, it can only be removed mechanically.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eRESTRICTIONS\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure that the temperature of the substrate is between 10°C and 30°C, and that it is at least 3°C above the day’s dew point.\u003c\/li\u003e\n\u003cli\u003eMake sure that the humidity level of the substrate is below 4%. Do not apply the product on humid substrates or porous surfaces that may absorb humidity from the soil.\u003c\/li\u003e\n\u003cli\u003eMaintain a relative humidity of maximum 85% during application and curing.\u003c\/li\u003e\n\u003cli\u003eProtect from humidity, condensation and water during the 48-hour curing period.\u003c\/li\u003e\n\u003cli\u003eDo not apply outside.\u003c\/li\u003e\n\u003cli\u003eThe surface can become discoloured in places that are regularly exposed to UV light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12 warning\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Attention.png?10293583600776865347\" alt=\"\"\u003e\n\u003cdiv class=\"warning-text-epoxy\"\u003e\n\u003cspan class=\"small-title-epoxy\"\u003eWARNING\u003c\/span\u003e Always wear safety goggles, nitrile gloves and long sleeves and pants to avoid any contact with the product. If skin contact occurs, wash immediately with warm soapy water and rinse thoroughly.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clearfix\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","products":[{"product_id":"100-solid-clear-epoxy-4-5l","title":"100% Solid Clear Epoxy 4,5L (842315052011)","description":"\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ECGSFjmSa7Q\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eIf you are looking to get a personalized EPOXY, we offer over 1 million color possibilities, delivered right to your door! Create your own design in just a few clicks! PERSONALIZED COLOUR: EPOXY TO\/GO offers a broad range of colours.\u003c\/p\u003e\n\u003cp\u003e100% solids epoxy TO\/GO kit is made in Canada\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecialized product\u003c\/li\u003e\n\u003cli\u003eUltra-gloss finish\u003c\/li\u003e\n\u003cli\u003eLow-odour\u003c\/li\u003e\n\u003cli\u003eResists hot tires, pickup trucks and oil\/gas\u003c\/li\u003e\n\u003cli\u003eProtects concrete against chipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAVERAGE COVERAGE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e250 sq. ft. but can vary between 60 sq. ft. and 250 sq. ft. depending on type of surface and selected colors. Read below for more information,\u003c\/p\u003e\n\u003cp\u003eConsult our online user guide before use.\u003c\/p\u003e\n\u003cp\u003eThe kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003enitrile gloves\u003c\/li\u003e\n\u003cli\u003eStirring rod\u003c\/li\u003e\n\u003cli\u003eVinyl Flakes (450 g)\u003c\/li\u003e\n\u003cli\u003eEpoxy resin – 3 L. hardener – 1.5 L.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDANGER:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCONTAINS PRODUCTS THAT MAY BE HARMFUL. READ WARNINGS ON EACH CONTAINER BEFORE INSTALLATION OR USAGE.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOLOR AVERAGE COVERAGE :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard colours (first coat) cover about 400 sq. ft. (5-mil thick)\u003c\/li\u003e\n\u003cli\u003eStandard colours (second coat) covers a maximum of 250 sq. ft. (8-mil thick)\u003c\/li\u003e\n\u003cli\u003eClear epoxy on a smooth surface covers about 250 sq. ft. (8-mil thick)\u003c\/li\u003e\n\u003cli\u003eClear epoxy on a textured surface (flakes) covers about 100 sq. ft. (20-mil thick)\u003c\/li\u003e\n\u003cli\u003eSafety colours cover a maximum of 125 sq. ft. (16-mil thick)\u003c\/li\u003e\n\u003cli\u003eMetallic colours cover a maximum of 60 sq. ft. (32-mil thick)*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*NOTE that metallic colours are not recommended if you are doing a small garage 200 sq. ft. or smaller. The metallic pigments are heavy and tend to slip towards the center for the garage.\u003c\/p\u003e\n\u003cp\u003eFor all colours:  Make sure to pour all of the container in the epoxy resin container (component A). Mix, scraping the sides and bottom of the bucket to get a homogeneous colour. If a coat requires more than one 4.5 L container, mix the containers together in a 5‑gallon pail and pour back into the original containers according to volume.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eREAD THE INSTRUCTIONS CAREFULLY BEFORE USE.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43737305429,"sku":"","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/DSC_0131_resultat_f08299da-71aa-4415-9cf3-29af15f89101.jpg?v=1571438820"},{"product_id":"lining-for-plastic-pan-ztr200-rztl200","title":"Linings for plastic pan (RZTL200) (Pack of 10)","description":"\u003cp\u003eThis lining for plastic pan is perfect for any epoxy or paint project and provide good container. Its hard plastic will fit your needs.\u003c\/p\u003e\n\u003cp\u003eFits with the profound plastic tray ZTR-200.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43767366421,"sku":"","price":8.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-lining-for-plastic-pan-ztr200-rztl200-1.jpg?v=1571438820"},{"product_id":"profound-plastic-pan-ztr200","title":"Plastic Pan (ZTR200)","description":"\u003cp\u003eThis profound plastic tray is perfect for any large epoxy or paint project. Its hard plastic will fit your needs.\u003c\/p\u003e\n\u003cp\u003eWe recommend to also purchase lining RZTL-200.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43767573461,"sku":"","price":2.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-profound-plastic-pan-ztr200-1.jpg?v=1571438820"},{"product_id":"8-pcs-white-cotton-cloths-rprw-j8p","title":"8 Pieces White Cotton Cloths (RPRW-J8P)","description":"\u003cp\u003eIdeal for cleaning during epoxy or paint application. \u003c\/p\u003e\n\u003cpre class=\"tw-data-text tw-ta tw-text-small\" data-placeholder=\"Translation\" id=\"tw-target-text\" data-fulltext=\"\" dir=\"ltr\"\u003e\u003c\/pre\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43768645909,"sku":"","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-8-pieces-white-cotton-cloths-rprw-j8p-1.jpg?v=1571438820"},{"product_id":"masking-tape-brown-12-mpg-12","title":"12'' Brown Masking Paper (MPG-12)","description":"\u003cp\u003eHelps to provide overall epoxy or paint protection\u003c\/p\u003e\n\u003cpre class=\"tw-data-text tw-ta tw-text-small\" data-placeholder=\"Translation\" id=\"tw-target-text\" data-fulltext=\"\" dir=\"ltr\"\u003e\u003c\/pre\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43768718677,"sku":"","price":3.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-masking-tape-brown-12-mpg-12-1.jpg?v=1571438820"},{"product_id":"masking-tape-brown-9-mpg-09","title":"9'' Brown Masking Paper (MPG-09)","description":"\u003cp\u003eHelps to provide overall epoxy or paint protection\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43768846997,"sku":"","price":2.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-masking-tape-brown-9-mpg-09-1.jpg?v=1571438820"},{"product_id":"masking-tape-pro-green-24mm-x-55-mm-309-24","title":"24mm x 55 mm Green Masking Tape Pro (309-24)","description":"","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43768945301,"sku":"","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b157f22eef93_0_1528135458.jpg?v=1571438820"},{"product_id":"masking-tape-pro-green-36mm-x-55-mm-309-36","title":"36mm x 55 mm Green Masking Tape Pro (309-36)","description":"","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43769018197,"sku":"","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b157e6580e4f_0_1528135269.jpg?v=1571438820"},{"product_id":"masking-tape-pro-green-48mm-x-55-mm-309-48","title":"48mm x 55 mm Green Masking Tape Pro (309-48)","description":"","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43769112981,"sku":"","price":7.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b157d80d1be9_0_1528135040_00f3335d-0359-4062-b56f-6770e01fe3fc.jpg?v=1571438821"},{"product_id":"nour-3-16-notched-epdm-rubber-blade-24-zsq24rb316","title":"3\/16'' NOTCHED RUBBER BLADE 24''","description":"\u003cp\u003e1\/8'' 24'' wide  EPDM blade for squeegee. Blade only. You need to purchase the frame ZSQ24FR to use the blade. Blade is useful to ensure even thickness of product. This allows you to dose the product evenly.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43896314773,"sku":"","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b15855ea6cdc_0_1528137054.jpg?v=1571438821"},{"product_id":"nour-1-8-notched-epdm-rubber-blade-24-zsq24rb18","title":"1\/8'' NOTCHED RUBBER BLADE 24''","description":"\u003cp\u003e3\/16'' 24'' wide  EPDM blade for squeegee. Blade only. You need to purchase the frame ZSQ24FR to use the blade. Blade is useful to ensure even thickness of product. This allows you to dose the product evenly.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43896352853,"sku":"","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b1585b413309_0_1528137140.jpg?v=1571438821"},{"product_id":"nour-1-4-notched-epdm-rubber-blade-24-zsq24rb14","title":"1\/4'' NOTCHED RUBBER BLADE 24''","description":"\u003cp\u003e1\/4'' 24'' wide  EPDM blade for squeegee. Blade only. You need to purchase the frame ZSQ24FR to use the blade. Blade is useful to ensure even thickness of product. This allows you to dose the product evenly.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43896383509,"sku":"","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b1586be970e6_0_1528137406.jpg?v=1571438821"},{"product_id":"nour-straight-epdm-rubber-blade-24-zsq24rb","title":"Straight Rubber Blade 24'' (ZSQ24RB)","description":"\u003cp\u003eStraight 24'' wide  EPDM blade for squeegee.  Blade only. You need to purchase the frame ZSQ24FR to use the blade.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43896478293,"sku":"","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-nour-straight-epdm-rubber-blade-24-zsq24rb-1.jpg?v=1571438821"},{"product_id":"nour-squeegee-frame-24-zsq24fr","title":"Nour squeegee frame 24'' (ZSQ24FR)","description":"\u003cp\u003eThe squeegee frame does not include the blades.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43896517781,"sku":"","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b1584156b2b6_0_1528136725.jpg?v=1571438821"},{"product_id":"aluminium-extension-pole-3-6-reep3","title":"Aluminium Extension Pole 3’-6’ (REEP3)","description":"\u003cp\u003eIf you don't already have a broomer stick, this will be useful to save your back.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43896561557,"sku":"","price":6.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b158270c2429_0_1528136304.jpg?v=1571438821"},{"product_id":"industrial-paint-roller-18-z18t10","title":"Roller 18'' (Z18T10)","description":"This paint roller is perfect for epoxy application. Does not leave lint like other rollers.","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43896605525,"sku":"","price":10.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/imagee.png?v=1571438821"},{"product_id":"paint-roller-tradition-9-10mm-z9t10nt","title":"Roller 9 ½ '' (Z9T10NT)","description":"","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43896678741,"sku":"","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b157a8ce6e60_0_1528134284_1d984019-dfbe-42a9-84ec-18312d86e797.jpg?v=1571438821"},{"product_id":"18-roller-frame-rzfr1805","title":"18'' Roller Frame (RZFR1805)","description":"\u003cp\u003eIdeal for epoxy or paint applying\u003c\/p\u003e\n\u003cp\u003eThis product does not include the rollers.\u003c\/p\u003e\n\u003cpre class=\"tw-data-text tw-ta tw-text-medium\" data-placeholder=\"Translation\" id=\"tw-target-text\" data-fulltext=\"\" dir=\"ltr\"\u003e\u003c\/pre\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43896721173,"sku":"RZFR1805","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-18-roller-frame-rzfr1805-1.jpg?v=1571438821"},{"product_id":"non-slippery-pro-frame-zfr952","title":"Non-slip roller frame (ZFR952)","description":"\u003cp\u003eGood for all epoxy types except METALLIC.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43896799125,"sku":"","price":3.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/image.png?v=1571438821"},{"product_id":"nour-spiked-gunite-shoes-zsqshoes","title":"Nour spiked gunite shoes (ZSQSHOES)","description":"\u003cp\u003eThese are a must for all types of epoxy installations unless you are doing a really small surface.  The spiked shoes will allow you to walk on the epoxy.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43896836117,"sku":"","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b1581cb5cd83_0_1528136139.jpg?v=1571438821"},{"product_id":"stainless-steel-mixer-for-1-to-2-gallon-container-zsqjiffyhs2","title":"Stainless Steel Mixer for 1 to 2 Gallon Container (ZSQJIFFYHS2)","description":"\u003cp\u003eYou can use a metal mixer, but be careful not to scratch the plastic container as this may create plastic chips you don't want to see in your final result.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897086869,"sku":"","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b157c14b1108_0_1528134676.jpg?v=1571438821"},{"product_id":"disposable-2-wood-handle-silk-brush-893","title":"Disposable 2'' wood handle\/silk brush (893) (Pack of 10)","description":"\u003cp\u003eAn essential for all epoxy jobs.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897115669,"sku":"","price":15.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b15808fba324_0_1528135823.jpg?v=1571438821"},{"product_id":"coal-flakes-vc-1066","title":"Coal Flakes 5lbs","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e\n\u003cp\u003e. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897322645,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-coal-flakes-vc-1066-1.jpg?v=1571438821"},{"product_id":"ctm-black-grey-white-flakes-450g-vc-1059","title":"Domino Flakes 5lbs","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the\u003cspan\u003e \u003c\/span\u003esecond coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit\u003cspan\u003e \u003c\/span\u003esandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897346773,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/full_flakes_VC-1059.jpg?v=1571438821"},{"product_id":"black-flakes-450g-vc-1054","title":"Black Flakes 5lbs","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the\u003cspan\u003e \u003c\/span\u003esecond coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit\u003cspan\u003e \u003c\/span\u003esandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897377429,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-black-flakes-450g-vc-1054-1.jpg?v=1571438821"},{"product_id":"orange-flakes-450g-vc-1052","title":"Orange Flakes 5lbs (VC-1052)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897406357,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-orange-flakes-450g-vc-1052-1.jpg?v=1571438821"},{"product_id":"pumpkin-flakes-450g-vc-1050","title":"Pumpkin Flakes 5lbs (VC-1050)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897446357,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-pumpkin-flakes-450g-vc-1050-1.jpg?v=1571438821"},{"product_id":"burgundy-flakes-450g-vc-1046","title":"Burgundy Flakes 5lbs","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the\u003cspan\u003e \u003c\/span\u003esecond coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit\u003cspan\u003e \u003c\/span\u003esandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897528405,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-burgundy-flakes-450g-vc-1046-1.jpg?v=1571438821"},{"product_id":"red-flakes-450g-vc-1044","title":"Red Flakes 5lbs (VC-1044)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897572309,"sku":"","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-red-flakes-450g-vc-1044-1.jpg?v=1571438821"},{"product_id":"red-brick-flakes-450g-vc-1042","title":"Red Brick Flakes 5lbs (VC-1042)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e\n\u003cp\u003e. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897598357,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-red-brick-flakes-450g-vc-1042-1.jpg?v=1571438821"},{"product_id":"pink-flakes-450g-vc-1040","title":"Pink Flakes 5lbs (VC-1040)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897620245,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-pink-flakes-450g-vc-1040-1.jpg?v=1571438821"},{"product_id":"dark-grey-flakes-450g-vc-1038","title":"Dark Grey Flakes 5lbs","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897646933,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-dark-grey-flakes-450g-vc-1038-1.jpg?v=1571438821"},{"product_id":"graphite-flakes-450g-vc-1036","title":"Graphite Flakes 5lbs (VC-1036)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897666453,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-graphite-flakes-450g-vc-1036-1.jpg?v=1571438821"},{"product_id":"granite-flakes-450g-vc-1034","title":"Granite Flakes 5lbs (VC-1034)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897787669,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-granite-flakes-450g-vc-1034-1.jpg?v=1571438821"},{"product_id":"brown-flakes-450g-vc-1032","title":"Brown Flakes 5lbs","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the\u003cspan\u003e \u003c\/span\u003esecond coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit\u003cspan\u003e \u003c\/span\u003esandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897823445,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-brown-flakes-450g-vc-1032-1.jpg?v=1571438821"},{"product_id":"autumn-brown-flakes-400g-vc-1030","title":"Autumn Brown Flakes 5lbs","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Coverage level approximate percentage\/ Approximate quantity\u003cbr\u003e Very light 2% 0.3 lb. 0.125 kg\u003cbr\u003e Light 5% 0.7 lb. 0.3 kg\u003cbr\u003e Medium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003e Intense 25% 3.5 lb. 1.6 kg\u003cbr\u003e Very intense 50% 7 lb. 3.2 kg\u003cbr\u003e Complete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897852501,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-autumn-brown-flakes-450g-vc-1030-1.jpg?v=1571438822"},{"product_id":"beige-flakes-400g-vc-1026","title":"Beige Flakes 5lbs","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the\u003cspan\u003e \u003c\/span\u003esecond coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit\u003cspan\u003e \u003c\/span\u003esandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897924693,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-beige-flakes-450g-vc-1026-1.jpg?v=1571438822"},{"product_id":"milkweed-flakes-450g-vc-1024","title":"Milkweed Flakes 5lbs (VC-1024)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003cbr\u003e Coverage level approximate percentage\/ Approximate quantity\u003cbr\u003e Very light 2% 0.3 lb. 0.125 kg\u003cbr\u003e Light 5% 0.7 lb. 0.3 kg\u003cbr\u003e Medium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003e Intense 25% 3.5 lb. 1.6 kg\u003cbr\u003e Very intense 50% 7 lb. 3.2 kg\u003cbr\u003e Complete 100% 15 lb. 7 kg\u003cbr\u003e Remember: you need to apply an additional coat of clear epoxy over the flakes to prevent the flakes\u003cbr\u003e from chipping.\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897966421,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-milkweed-flakes-450g-vc-1024-1.jpg?v=1571438822"},{"product_id":"white-flakes-450g-vc-1022","title":"White Flakes 5lbs (VC-1022)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Coverage level approximate percentage\/ Approximate quantity\u003cbr\u003e Very light 2% 0.3 lb. 0.125 kg\u003cbr\u003e Light 5% 0.7 lb. 0.3 kg\u003cbr\u003e Medium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003e Intense 25% 3.5 lb. 1.6 kg\u003cbr\u003e Very intense 50% 7 lb. 3.2 kg\u003cbr\u003e Complete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43897996181,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-white-flakes-450g-vc-1022-1.jpg?v=1571438822"},{"product_id":"dark-blue-flakes-450g-vc-1020","title":"Dark Blue Flakes 5lbs","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43898150421,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-dark-blue-flakes-450g-vc-1020-1.jpg?v=1571438822"},{"product_id":"powder-blue-storm-flakes-450g-vc-1018","title":"Powder Blue Storm Flakes 5lbs (VC-1018)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43898280533,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-powder-blue-storm-flakes-450g-vc-1018-1.jpg?v=1571438822"},{"product_id":"primary-blue-flakes-450g-vc-1016","title":"Primary Blue Flakes 5lbs (VC-1016)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43898305749,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-primary-blue-flakes-450g-vc-1016-1.jpg?v=1571438822"},{"product_id":"delarey-blue-flakes-450g-vc-1014","title":"Delarey Blue Flakes 5lbs","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43898352469,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-delarey-blue-flakes-450g-vc-1014-1.jpg?v=1571438822"},{"product_id":"powder-blue-flakes-450g-vc-1012","title":"Powder Blue Flakes 5lbs (VC-1012)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43898371285,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-powder-blue-flakes-450g-vc-1012-1.jpg?v=1571438822"},{"product_id":"forest-green-flakes-450g-vc-1010","title":"Forest Green Flakes 450g (VC-1010)","description":"\u003cp\u003eDECORATIVE FLAKES: EPOXY TO\/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003cbr\u003e Coverage level approximate percentage\/ Approximate quantity\u003cbr\u003e Very light 2% 0.3 lb. 0.125 kg\u003cbr\u003e Light 5% 0.7 lb. 0.3 kg\u003cbr\u003e Medium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003e Intense 25% 3.5 lb. 1.6 kg\u003cbr\u003e Very intense 50% 7 lb. 3.2 kg\u003cbr\u003e Complete 100% 15 lb. 7 kg\u003cbr\u003e Remember: you need to apply an additional coat of clear epoxy over the flakes to prevent the flakes from chipping.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43898438869,"sku":"","price":4.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_5b215a3015724_0_1528912432.jpg?v=1571438822"},{"product_id":"mixed-vinyl-flake-pe-saphire-5-lbs-pe700985","title":"Mixed Vinyl Flakes Sapphire 5 lbs","description":"\u003cp\u003eTHE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Coverage level approximate percentage\/ Approximate quantity:  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Very light 2% 0.3 lb. 0.125 kg\u003cbr\u003e Light 5% 0.7 lb. 0.3 kg\u003cbr\u003e Medium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003e Intense 25% 3.5 lb. 1.6 kg\u003cbr\u003e Very intense 50% 7 lb. 3.2 kg\u003cbr\u003e Complete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Remember: you need to apply 1-3  coats of clear epoxy over the flakes to prevent the flakes from chipping.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43901795989,"sku":"842315055166","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_592ed95c0f4f8_0_1496242524.jpg?v=1571438822"},{"product_id":"mixed-vinyl-flake-pe-volcanic-ash-5-lbs-pe700981","title":"Mixed Vinyl Flakes Volcanic Ash 5 lbs","description":"\u003cp\u003eTHE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43901998229,"sku":"842315055128","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-mixed-vinyl-flakes-volcanic-ash-5-lbs-1.jpg?v=1571438822"},{"product_id":"mixed-vinyl-flake-pe-gravel-5-lbs-pe700980","title":"Mixed Vinyl Flakes Gravel 5 lbs","description":"\u003cp\u003eTHE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43902006741,"sku":"842315055111","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-mixed-vinyl-flakes-gravel-5-lbs-pe700980-1.jpg?v=1571438822"},{"product_id":"mixed-vinyl-flake-pe-cappucino-5-lbs-pe700975","title":"Mixed Vinyl Flakes Cappucino 5 lbs","description":"\u003cp\u003eTHE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity:  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual.\u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43902097941,"sku":"842315055067","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/8924_592ed642e83bf_0_1496241730_c8a0e4e1-e7a8-4009-a43e-8970066b7668.jpg?v=1571438822"},{"product_id":"mixed-vinyl-flake-pe-wreck-wood-5-lbs-pe700974","title":"Mixed Vinyl Flakes Wreck Wood 5 lbs","description":"\u003cp\u003eTHE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL\/100 SQ. FT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCoverage level approximate percentage\/ Approximate quantity\u003cbr\u003eVery light 2% 0.3 lb. 0.125 kg\u003cbr\u003eLight 5% 0.7 lb. 0.3 kg\u003cbr\u003eMedium 12.5% 1.75 lb. 0.8 kg\u003cbr\u003eIntense 25% 3.5 lb. 1.6 kg\u003cbr\u003eVery intense 50% 7 lb. 3.2 kg\u003cbr\u003eComplete 100% 15 lb. 7 kg\u003c\/p\u003e\n\u003cp\u003e*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want. \u003c\/p\u003e\n\u003cp\u003e**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/p\u003e\n\u003cp\u003e***Times are approximate and will be affected by changing ambient conditions, especially\u003cbr\u003echanges in temperature and relative humidity.*\u003c\/p\u003e\n\u003cp\u003e****Make sure to always refer to the complete user manual. \u003c\/p\u003e","brand":"Epoxy To\/Go","offers":[{"title":"Default Title","offer_id":43902128021,"sku":"842315055050","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/products\/market-place-mixed-vinyl-flakes-wreck-wood-5-lbs-1.jpg?v=1571438822"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/collections\/Epoxy_2_grande_75d858c0-66f7-4457-a3a4-69bbd68d67e0.jpg?v=1497897958","url":"https:\/\/www.decktogo.com\/collections\/epoxy-floor\/epoxy-dye.oembed","provider":"Deck TO\/GO","version":"1.0","type":"link"}