{"title":"Plancher Epoxy","description":"\u003cdiv class=\"epoxy\"\u003e\n\u003cdiv class=\"col-sm-12 essentials-complements\"\u003e\n\u003cdiv class=\"col-sm-6\"\u003e\n\u003ch2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Essentiels.png?1226686490779651331\" alt=\"\"\u003e\u003cspan class=\"entete-titre-epoxy\"\u003eThe\u003c\/span\u003e Essentials\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNitrile gloves\u003c\/li\u003e\n\u003cli\u003eSafety goggles\u003c\/li\u003e\n\u003cli\u003eDrill with mixer\u003c\/li\u003e\n\u003cli\u003eStir stick\u003c\/li\u003e\n\u003cli\u003e100% polyester brush\u003c\/li\u003e\n\u003cli\u003e10 mm lint-free roller\u003c\/li\u003e\n\u003cli\u003eSpiked shoes\u003c\/li\u003e\n\u003cli\u003eXylene\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-6\"\u003e\n\u003ch2\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Complements.png?1226686490779651331\" alt=\"\"\u003e\u003cspan class=\"entete-titre-epoxy\"\u003eThe\u003c\/span\u003e Complements\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCotton cloths\u003c\/li\u003e\n\u003cli\u003eConcrete preparation\u003c\/li\u003e\n\u003cli\u003eDegreaser\u003c\/li\u003e\n\u003cli\u003eCleaning brush\u003c\/li\u003e\n\u003cli\u003eConcrete filler\u003c\/li\u003e\n\u003cli\u003eGinder\u003c\/li\u003e\n\u003cli\u003eSander\u003c\/li\u003e\n\u003cli\u003eVacuum cleaner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cp class=\"small-title-epoxy\"\u003eApproximate Coverage From One Container (4.5 L)\u003c\/p\u003e\n\u003ctable class=\"table table-striped\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard colours (first coat)\u003c\/td\u003e\n\u003ctd\u003eAbout 400 sq. ft. (5-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard colours (second coat)\u003c\/td\u003e\n\u003ctd\u003eMaximum 250 sq. ft. (8-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClear epoxy on smooth surface\u003c\/td\u003e\n\u003ctd\u003eAbout 250 sq. ft. 8-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClear epoxy on textured surface (flakes)\u003c\/td\u003e\n\u003ctd\u003eAbout 100 sq. ft. (20-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety colours\u003c\/td\u003e\n\u003ctd\u003eMaximum 125 sq. ft. (16-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetallic colours\u003c\/td\u003e\n\u003ctd\u003eMaximum 60 sq. ft. (32-mil thick)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eImportant!\u003c\/span\u003e These quantites are aproximate and are for reference only. The required amount may vary depending on the texture of the surface and the thickness of the coats applied.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy1\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Preparation-surface.png?10820792025657361221\" alt=\"\"\u003e\u003cspan\u003e Surface Preparation\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy1\"\u003e\n\u003cp\u003eProper surface preparation is crucial. The concrete must be clean, dry and free of oil and contaminants.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eCLEANING:\u003c\/span\u003e Clean the surface using a concrete preparation. Rinse thoroughly and leave to dry for at least 48 hours. For stubborn oil stains, use a degreaser.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eSANDING:\u003c\/span\u003e Resurfacing with a polisher is by far the best surface preparation method, but it can be replaced by sanding for most residential projects. Sand the surface using a sander fitted with 60-grit sandpaper in order to remove old paint.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eREMOVING DUST:\u003c\/span\u003e Remove all dust from the surface using a shop vacuum. Remove all contaminants or fine concrete dust from the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eFILLING CRACKS:\u003c\/span\u003e Expand the cracks using a grinder in order to free up friable particles, and clean with the shop vacuum. Use a concrete filler. TO\/GO 100% solids epoxy can be applied 4 to 6 hours later.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy2\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Coloration.png?7646703456858064830\" alt=\"\"\u003e \u003cspan\u003eTinting\u003cspan class=\"small-hidden\"\u003e (Before Adding The Hardener)\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy2\"\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eREADY-MIXED COLOURS:\u003c\/span\u003e You only need to stir it a little before adding the hardener.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003ePERSONALIZED COLOUR:\u003c\/span\u003e Pour all of the tint in the epoxy resin container (component A). Mix, scraping the sides and bottom of the bucket to get a homogeneous colour. If a coat requires more than one 4.5 L container, mix the containers together in a 5-gallon pail and pour back into the original containers according to volume.\u003c\/p\u003e\n\u003cp class=\"important\"\u003e\u003cspan class=\"small-title-epoxy\"\u003eIMPORTANT!\u003c\/span\u003e Colour variations may occur if tinting, mixing and application procedures are not followed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy3\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Malaxage.png?7646703456858064830\" alt=\"\"\u003e \u003cspan\u003eMixing\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy3\"\u003e\n\u003cp\u003eStir each component separately. Pour all the hardener (component B) in the epoxy resin (component A). Mix well for 4 minutes at a low speed (300 to 450 RPM) using a drill fitted with a mixer. Do not mix at a high speed to prevent air entrapment bubbles. Scrape the sides and bottom of the bucket frequently with a stir stick to get a homogeneous mixture. Let the mixture stand for 2 minutes. Apply all of the mixture within 30 minutes.\u003c\/p\u003e\n\u003cp class=\"important\"\u003e\u003cspan class=\"small-title-epoxy\"\u003eIMPORTANT!\u003c\/span\u003e Mixing must be done properly in order for the hardener to have a uniform effect. The product must be applied within 30 minutes of mixing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy4\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Application.png?7646703456858064830\" alt=\"\"\u003e \u003cspan\u003eApplication\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy4\"\u003e\n\u003cp\u003ePour the product directly onto the floor in consecutive and parallel strips. Using a brush, quickly cut in the edges. Then, using a squeegee, spread the product and back roll (left to right, then toward you). It is important to get a uniform coating and avoid puddling.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eRECOMMANDATIONS\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDo not touch up the product after 10 minutes.\u003c\/li\u003e\n\u003cli\u003eWear spiked shoes to walk on the coated surface.\u003c\/li\u003e\n\u003cli\u003eApply a coat of clear epoxy on dark or metallic colours.\u003c\/li\u003e\n\u003cli\u003eApply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn vertical or sloped surfaces, apply THIN COATS of the product to prevent sagging.\u003c\/p\u003e\n\u003cp class=\"important\"\u003e\u003cspan class=\"small-title-epoxy\"\u003eIMPORTANT!\u003c\/span\u003e The product will start to cure quickly after 40 minutes and will be completely unusable after 50 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eANTI-SKID SAND AND DECORATIVE FLAKES:\u003c\/span\u003e To get an anti-skid surface, sprinkle quartz sand evenly within 60 minutes of applying epoxy. Back roll (left to right, then toward you).\u003c\/p\u003e\n\u003cp\u003eUse the same technique to add decorative flakes. Apply an additional coat of clear epoxy to prevent the flakes from chipping.\u003c\/p\u003e\n\u003cspan class=\"table-title-epoxy\"\u003eAMOUNT OF DECORATIVE FLAKES BASED ON DESIRED HIDING LEVEL\/100 SQ. FT.\u003c\/span\u003e\n\u003ctable class=\"table table-striped\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHiding level\u003c\/th\u003e\n\u003cth\u003eApproximate percentage\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eApproximate quantity\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery light\u003c\/td\u003e\n\u003ctd\u003e2%\u003c\/td\u003e\n\u003ctd\u003e0.3 lb.\u003c\/td\u003e\n\u003ctd\u003e0.125 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight\u003c\/td\u003e\n\u003ctd\u003e5%\u003c\/td\u003e\n\u003ctd\u003e0.7 lb.\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e12.5%\u003c\/td\u003e\n\u003ctd\u003e1.75 lb.\u003c\/td\u003e\n\u003ctd\u003e0.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntense\u003c\/td\u003e\n\u003ctd\u003e25%\u003c\/td\u003e\n\u003ctd\u003e3.5 lb.\u003c\/td\u003e\n\u003ctd\u003e1.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVery intense\u003c\/td\u003e\n\u003ctd\u003e50%\u003c\/td\u003e\n\u003ctd\u003e7 lb.\u003c\/td\u003e\n\u003ctd\u003e3.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComplete\u003c\/td\u003e\n\u003ctd\u003e100%\u003c\/td\u003e\n\u003ctd\u003e15 lb.\u003c\/td\u003e\n\u003ctd\u003e7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy5\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Temps.png?7646703456858064830\" alt=\"\"\u003e \u003cspan\u003eCuring Time\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy5\"\u003e\n\u003cp\u003eAllow a minimum of 24 hours before permitting foot traffic and a minimum of 48 to 72 hours before permitting vehicles on it. The temperature and humidity will affect the curing time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12\"\u003e\n\u003cdiv class=\"subtitle-epoxy\" data-toggle=\"collapse\" data-target=\"#content-epoxy6\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Nettoyage.png?7646703456858064830\" alt=\"\"\u003e \u003cspan\u003eCleaning\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"collapse\" id=\"content-epoxy6\"\u003e\n\u003cp\u003eClean all tools with xylene immediately after use. Always keep your goggles and gloves on to avoid any contact with the product.\u003c\/p\u003e\n\u003cp class=\"important\"\u003e\u003cspan class=\"small-title-epoxy\"\u003eIMPORTANT!\u003c\/span\u003e Once the product has cured, it can only be removed mechanically.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"small-title-epoxy\"\u003eRESTRICTIONS\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure that the temperature of the substrate is between 10°C and 30°C, and that it is at least 3°C above the day’s dew point.\u003c\/li\u003e\n\u003cli\u003eMake sure that the humidity level of the substrate is below 4%. Do not apply the product on humid substrates or porous surfaces that may absorb humidity from the soil.\u003c\/li\u003e\n\u003cli\u003eMaintain a relative humidity of maximum 85% during application and curing.\u003c\/li\u003e\n\u003cli\u003eProtect from humidity, condensation and water during the 48-hour curing period.\u003c\/li\u003e\n\u003cli\u003eDo not apply outside.\u003c\/li\u003e\n\u003cli\u003eThe surface can become discoloured in places that are regularly exposed to UV light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-12 warning\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/files\/Picto-Attention.png?10293583600776865347\" alt=\"\"\u003e\n\u003cdiv class=\"warning-text-epoxy\"\u003e\n\u003cspan class=\"small-title-epoxy\"\u003eWARNING\u003c\/span\u003e Always wear safety goggles, nitrile gloves and long sleeves and pants to avoid any contact with the product. If skin contact occurs, wash immediately with warm soapy water and rinse thoroughly.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"clearfix\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","products":[],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1096\/7404\/collections\/Epoxy_2_grande_75d858c0-66f7-4457-a3a4-69bbd68d67e0.jpg?v=1497897958","url":"https:\/\/www.decktogo.com\/fr\/collections\/epoxy-floor.oembed","provider":"Deck TO\/GO","version":"1.0","type":"link"}